RRM

[mdshelton1]

How can you confirm that RRM is on (running)
Thanks
MikeyD


Sent from Cisco Technical Support Android App

[Stephen Rodriguez]

go to Wireless > pick your netowrk > RRM > RF Grouping.

will show you what WLC are in the group, whom is the leader and the last run time

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Scott Fella]

You can look at the gui or issue this in the CLI

(WLC2504) >show advanced 802.11a channel

Leader Automatic Channel Assignment
  Channel Assignment Mode........................ AUTO
  Channel Update Interval........................ 24 Hours
  Anchor time (Hour of the day).................. 0
  Channel Update Contribution.................... SNI..
  CleanAir Event-driven RRM option............... Enabled
  CleanAir Event-driven RRM sensitivity.......... Medium
  Channel Assignment Leader...................... WLC2504 (192.168.201.24)
  Last Run....................................... 39225 seconds ago

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[mdshelton1]

Is it the "Channel Assignment Mode........................ AUTO"
Auto meaning it is on and fix meaning it is manual not on?
 

Sent from Cisco Technical Support Android App

[Scott Fella]

Auto means RRM is going to automatically make changes.  Fixed is basically saying keep the power the same.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[mdshelton1]

Thanks Scott

Sent from Cisco Technical Support Android App

[Scott Fella]

No problem.

Sent from Cisco Technical Support iPhone App