10-20-2006 07:41 AM - edited 07-03-2021 01:07 PM
Is there a way to schedule a reboot of specified APs? No firmware updates or reconfiguration issues here - just scheduling a reboot. Thanks.
Solved! Go to Solution.
10-23-2006 01:33 AM
Hi Carlo,
just define a new IOS-template in "Configure -> Templates" a new template named e.g reload_APs and enter the following in the "Costum Values"
reload
y
Then save this template.
Change to the Tab "Jobs", create a new jobtype "Config Regular" enter a jobname e.g reload_1131 and click on "Config Job".
Then follow the steps.
In Step 2 use the previously created template reload_APs and proceed with the steps 3-5.
I have tested this with my 1200, 1231 and 1242.
It is working fine.
Best regards,
Frank
P.S. Pleas rate helpfull posts
10-23-2006 01:33 AM
Hi Carlo,
just define a new IOS-template in "Configure -> Templates" a new template named e.g reload_APs and enter the following in the "Costum Values"
reload
y
Then save this template.
Change to the Tab "Jobs", create a new jobtype "Config Regular" enter a jobname e.g reload_1131 and click on "Config Job".
Then follow the steps.
In Step 2 use the previously created template reload_APs and proceed with the steps 3-5.
I have tested this with my 1200, 1231 and 1242.
It is working fine.
Best regards,
Frank
P.S. Pleas rate helpfull posts
10-23-2006 06:14 AM
Works perfectly.
Thanks!
Carlo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide