Setting up Push-To-Talk on WLC's

[jonesl1]

I have two wireless lan controllers tied to the WCS management suite.   I have recently configured a wireless voice SSID and have got it

working just fine.    Now i'm wanting to set up the PUSH-TO-TALK functionality on the 7925 wireless phones.    Can someone advise me

on what I would need to do to accomplish this.   I can't seem to find any documentation on it.  Your help would be appreciated.

WCS = version 6.0.170.0

WLC = version 4.2.205.0

Thank you,

[migilles · Accepted solution]

Are you using CUCM or CUCME?

With CM you would need an XML app to establish the PTT sessions.

See www.singlewire.com.

Also Java MIDP support is in 1.4(1), but would need a technology partner to create an app.

Sent from Cisco Technical Support iPhone App

[jonesl1]

Using CUCM.....so i guess i'll need that XML app.

I've set it up on CME without a problem, but I tried setting it up on CUCM...and couldnt figure it out.   I guess this is why.

Thanks,

[migilles]

Yes with CUCME, you can use the intercom and paging features to accomplish this.

I have this documen tested on pages 49-50 of the 7925G Deployment Guide.

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf