Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Resolved! speed lowering down
hias i know that if i have a "b" clientsin my network connected to my AP, they will definitely lower the connection of all my wireless clients.so all "G" clint will connect at the speed of 11 mbwhat about "N" "G" if i have a N AP with mix clint of N ...
Good day!Briefly about the problem:I have upgraded one of our autonomus AP to lightweight APAt first everything went ok - the LAP dowloaded the image from the WLC and then I was able to successfuly manage it though the controller.After that the LAP ...
How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller
Hi Folksi have wlc 4400 with ap 1231G,RRM is set to Automatic,but when the interference appeared the client get disconnected when the wlc change the clint from channel to channel,why is that, how to stop the disconnection of client?2)am running the t...
I have a couple of Standalone 1041 Access Points that I want to restrict access to the Web Management HTTPS to only a few IP Addresses. Is this doable? if so, is it done using the Filter defintion or something else? Does anyone have any examples t...
I tried to follow the usual documents to try to get AP downgraded by there are some commands missing from the IOS that I currently have on the system."flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" LWAPP image version 3.0.51.0the following commands are no...
Resolved! WiSM2 and VSS
Can VSS support WiSM2 in IOS 12.2(33)SXJ?
Hi All,In WLC, I can only choose external for Antenna Type, and Devesity and Antenna Gain as well. There is no way I can define the exact type like AIR-ANT5135D-R for the antenna. But from the WCS, I can see the AIR-ANT5135D-R under the Antenna Name....
Dear Experts,I have a doubt to clear. We have approximate 30 1130 ag WAP, fixed on the ceiling in upside position. Some access points are fixed exactly beside the Air Condition Cover. whose direct air hits the access point. and some are fixed beside ...
Resolved! WCS 7.0.164.0 - WLCs unreachable
Hi Guys,For some reason overnight the WCS server can no longer reach the lan controllers.They are on the same subnet and can ping both ways.I tried deleting and re-adding but it still cannot find it.I've tried rebooting everything and still doesnt wo...
Resolved! Port Channel in WLC2112
Hello,Can please someone tall me if its possible create portchannel in a WLC2112 or higher controller?best regards
Hi,End user has a WLC-4402-12-K9-V02 with 8 LAPs currently working, in short time will need to add more LAPs that will be more than 12.How can we add more capacity in order to support 25 LAPs?, regards
Hi thereThe MCS server wont show clients on the map any more. I get the following error:There are no clients on this floor. Either you don't have any MSE which locates clients or none of your MSE detected any clients on this floor.please see attached...
Resolved! Guest user access on LWAPP
/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-par...
We have a small campus and the following equipment:1 - 4402 WLC12 - APs3 Networks (Guest, Student, Staff)1 ACS serverWhat would you recommend in regards to a practical, yet effective, security setup. We currently use WEP/MAC filtering for the staff n...
