10-02-2018 01:46 AM - edited 07-05-2021 09:14 AM
is it the correct practise to set the wlc and the ap in the same vlan? in my previous implementations i noticed that when i set the ap and the wlc in the same vlan they wont see each other? i usually separate the ap in a different vlan and set the dhcp option to point to the wlc?
10-02-2018 03:56 AM
You can do in both ways. Its also depends on your infrastructure.
My personal recommandation is to use in same vlan but you could do in both ways.
Regards
Dont forget to rate helpful posts
10-03-2018 04:20 AM
If there are more than 60+ ap’s then I prefer to not have the aps on the same subnet. Typically I like to keep AP’s in a separate subnet and keep the wlc in the management subnet.
There are a bunch of ways to allow the so to find the WLC so its not a big deal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide