all,
I'm facing a problem to upgrade my WLC 5508 from 6.0.199.4 to 7.0.98.218
On my WLC, I have a bad src error message about the SFP.
With the version 6, I have the "warning" but the port is UP and Running
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
-- ------- ---- ------- ---------- ---------- ------ ------- ------- ----------
1 Normal Disa Enable Auto Auto Down Enable N/A Not Present
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Forw Enable Auto 1000 Full Up Enable N/A SFP Error
on version 7.0.98.218, the port never comes UP:
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
-- ------- ---- ------- ---------- ---------- ------ ------- ------- ----------
1 Normal Disa Enable Auto Auto Down Enable N/A Not Present
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A SFP Error
I see a bug about CSCta32912, but normally, it is solved in version 7.
How to solve this issue?
Thanks.
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
-- ------- ---- ------- ---------- ---------- ------ ------- ------- ----------
1 Normal Disa Enable Auto Auto Down Enable N/A Not Present
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Forw Enable Auto 1000 Full Up Enable N/A SFP Error
