Simultaneous a/b support on 1121G

[gwerling]

If I set my 1121G radio to support all data rates my "b" client is unable to associate. Is there something special I need to set on the radio to allow a "b" client to associate while all data rates are supported? If I disable the "g" data rates my client connects without a problem.

[mchin345]

I do not think you are missing anything, but you should also keep in mind that when operating in mixed-mode environments, the throughput and capacity improvements are very modest.

[MATTHEW BALYUZI]

Set only the 1, 2, 5.5 and 11MBps rates to "basic" (or "require" in the web interface), the rest (ie. the 802.11g rates) to enabled.

Both b and g clients should now connect.

[gwerling]

Thanks for the information. At this time we do not have any "G" clients so I am unable to test but do anticipate future use as wireless is deployed.