05-14-2003 06:19 PM - edited 07-04-2021 08:42 AM
Hi,
I'd like to know what is snmp managed object to get/set default or current transmit-key of 4 WEP (encryption) keys...
Even though I took a good look at every snmp mibs related to cisco aironet 1100, I could not find it...
Please help me...
Thanks,
Bumjong
05-20-2003 11:55 AM
You can get the OID from the following location:
05-20-2003 02:51 PM
Thank you for your response...
Actually I could find most OIDs to configure AP (Aironet 1100) parameters such as SSID, TxPower Level, Channel ID and ... on that ftp site but I could not find OID(s) to configure current transmit key (current WEP Key ID)...
Thanks,
Bumjong
05-26-2003 06:43 PM
See if the following helps:
.1.3.6.1.4.1.522.3.6.1.3.1.3
awcDot11WEPDefaultKeyValue OBJECT-TYPE
-- FROM AWCVX-MIB
-- TEXTUAL CONVENTION WEPKeytype128
SYNTAX OCTET STRING (5..13)
MAX-ACCESS read-write
STATUS Current
DESCRIPTION "A WEP default secret key value. The value is
write-only (attempt to read will result in
return of a zero-length string)."
05-27-2003 03:22 PM
Thank you for your information...
Unfortunately Aironet 1100 Series AP does not support aironet mib (1.3.6.1.4.1.522 and OIDs below 1.3.6.1.4.1.522) any more...so I think I have to use another OIDs which belongs to cisco...
Thanks,
Bumjong
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide