cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
588
Views
0
Helpful
2
Replies

snmp vwlc

tzifas001
Level 1
Level 1

hi we have a vwlc in vlan 24 and prtg in vlan 13. we can t get any traps and there is no access list between vlans. both devices are connected with cat 6513. i tried a device connected to vlan 24 and i get snmp messages from vwlc. so the controlles sends messages.do you have any suggestions?what should i look? 

2 Replies 2

Ric Beeching
Level 7
Level 7

Are you able to ping the PRTG device from your vWLC?

Could you describe (or paste/screenshot) your SNMP setup? You'll need to have the PRTG program setup as trap receiver. Do you know if PRTG requires you to setup the vWLC as a permitted SNMP sender?

Cheers,

Ric

-----------------------------
Please rate helpful / correct posts

yes i can ping the prtg device. i get snmp messages the other way. any vlan can t get snmp traps from vlan 24 but vlan 24 van get snmp traps from any vlan. the vwlc has the default values and enable snmp version 1

Review Cisco Networking for a $25 gift card