Software version 7.4(100.1) for WLC

[nouman_nabi]

Hi

Anyone has idea that when Cisco will release software version 7.4(100.1)  for WLC.

Regards,

Nomi

[Scott Fella]

I don't think there will be a .1 version... You need to talk to your local Cisco SE for information regarding the next version of code.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[nouman_nabi]

Hi Scott,

We are hitting by bug CSCud97983 and Cisco says it has been fixed in 7.4(100.1)

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud97983

Thanks

Nomi

[Leo Laohoo]

I believe the next firmware will be 7.5.X.

If you think you need a fix critically, ask TAC to get an engineering fix for you.

[TaylorW47]

Roll back to 7.3 - we ran into the same issue.

[Mohammed.Mutai.Khan]

hello scott. Can you tell me if 7.4 is compatible with wism controller

[Scott Fella]

It is not... The WiSM v1 supports up to the v7.0.x. Anything past that version, you need a WiSM v2, 2504. 5508, 7500, 8500 or vWLC.

Sent from Cisco Technical Support iPhone App

[rob.burgoyne]

Any luck getting this code? Doesn't look like its avalible to download on their site yet. I am trying to resolve an issue where my 1142s crash on 7.4.100.0 and I don't really want to roll back (yet).

[Scott Fella · Accepted solution]

You need to open a TAC case and they will make it available for you to download.

Sent from Cisco Technical Support iPhone App

[nouman_nabi]

Hi Robert,

Scott is right, I have got engineering image  from Cisco to fix bug CSCud97983.

Regards

Nomi

[Ravi Singh]

I would like to inform you that ISO 7.4(100.1) is still in road map. Most probably 7.5 will be the next.

[Leo Laohoo]

I would like to inform you that ISO 7.4(100.1) is still in road map.

State your source, Ravi. 

Your "information" is incorrect.  Very incorrect.  7.4.100.1 is an ENGINEERING fix.