Sophos Firewall XG125 with Cisco Switch SG300 10 Ports and Cisco Aironet 1815

[Houssein-Moussawi]

Hi Guys

what is the configurations to connect 4 Aironet 1815 to Cisco Switch SG300 and internet will be from Sophos Firewall XG125.

I am new to cisco and do not how to configure them.

Thank you

[Sandeep Choudhary]

1. Connect these access points to switchports and use below conifg (example)on switchports.

2. You must have a DHCP scope configured for these APs so that AP can IP address.

interface gi1

Description **AP1**
switchport mode trunk
switchport trunk native vlan <XX>

!

interface gi1

Description **AP2**
switchport mode trunk
switchport trunk native vlan <XX>

Regards

Dont forget to arte helpful posts