cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bookmark
|
Subscribe
|
566
Views
0
Helpful
3
Replies

ssh access (only) from wireless connection

goncalo.girao
Level 1
Level 1

Is it possible to restrain acess from ssh (CLI) without enable GUI acess from wireless lan?

Thank you

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

Yes, you need to put a CPU acl on the WLC that restricts that access

Sent from Cisco Technical Support iPhone App

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Here is a config example

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a7c988.shtml

If you find this helpful rate useful post !

thanks

__________________________________________________________________________________________
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
__________________________________________________________________________________________
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Saravanan Lakshmanan
Cisco Employee
Cisco Employee

enable management via dyn interface.

Fyi, cpu ACL is global and applicable for both wired and wireless management.

are you trying ssh to virtual ip from wireless client.

Review Cisco Networking for a $25 gift card