Solved: Support for dACL at WLC

Antonio Macia · ‎10-09-2019

Hi,

Is there any plan to support dACLs in the WLC?

As far as I know, SGACLs are supported, right? What's the difference between both if, in the end the SAGCLs implement filters based on destination ports, the IP addressing?

Regards.

Rasika Nayanajith · ‎10-09-2019

On the traditional WLCs (85xx,55xx,35xx,25xx), you have to locally define those ACL in order to call as part of AAA override. This is mainly due to AireOS running on WLC as oppose to IOS/IOS-XE on switches.

Newer WLCs, (9800 series) is based on IOS-XE, so you should have same capability as any other 9000 series catalyst

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

Rasika Nayanajith · ‎10-09-2019

On the traditional WLCs (85xx,55xx,35xx,25xx), you have to locally define those ACL in order to call as part of AAA override. This is mainly due to AireOS running on WLC as oppose to IOS/IOS-XE on switches.

Newer WLCs, (9800 series) is based on IOS-XE, so you should have same capability as any other 9000 series catalyst

HTH

Rasika

*** Pls rate all useful responses ***

Antonio Macia · ‎10-10-2019

Thank you Rasika.

I will check the capabilities of the new 9800 series.