07-15-2016 02:13 AM - edited 07-05-2021 05:25 AM
Good day!
I have 4 controllers 5508 in 2 HA pairs with 8.0.133.0 software.
I noticed strange messages like:
%CHKPT-4-INVALID: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0).[...It occurred 8 times/sec!.]
*spamApTask4: Jul 15 09:03:44.096: %LOG-4-Q_IND: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0).[...It occurred 7 times.!]
*spamApTask4: Jul 15 09:03:44.096: %LWAPP-3-INVALID_AID2: [SS]spam_api.c:1588 Association identifier 1 for client ac:fd:ec:a4:84:dd is already in use by ac:fd:ec:a4:84:dd for AP 00:3a:9a:1e:22:c0 slot 0 vap 7
The main strange for me is that the messages comes from address of redundancy standby peer.
Maybe someone knows why this happening? Can this message points to the network or HA problem?
Thanks!
01-24-2017 09:03 AM
I have this same problem too on my 5508 HA pair running 8.0.132.0 showing up in Syslog from my standby controller redundancy mgmt port IP. This issue started after migrating primary/secondary controllers to HA pair.
*spamApTask5: Jan 24 07:53:06.303: %LWAPP-3-INVALID_AID2: [PA]spam_api.c:1588 Association identifier 6 for client 5c:8d:4e:dc:7e:33 is already in use by d8:bb:2c:98:d9:48 for AP 70:e4:22:83:14:10 slot 1 vap 4
06-08-2017 07:07 PM
I'm running 8.0.140.0 and also still get syslog messages from the standby WLC.
06-07-2017 02:17 AM
Hi,
we get the same notifications and quite a lot of them too, about 6000 per hour.
%CHKPT-4-INVALID: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0). %LOG-4-Q_IND: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0).[...It occurred 3 times.!] |
running with 2 AIR-CT5508-K9 on version 8.2.141.0
There is very little to be found on this subject on the internet or the cisco site
06-08-2017 07:06 AM
You might want to check out this bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuy78583/?reffering_site=dumpcr
it is fixed after 8.0.134.x so 8.0.133.0 can be affected due to this. Kindly upgrade to 8.0.140.0 and see if you still get the messages
01-17-2018 12:17 PM
For these messages "%CHKPT-4-INVALID: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0)." there is a bug that is opened CSCvf22697. It is found on a different level of code but it my be the same issue you are seeing.
For the other messages like "%LOG-4-Q_IND: [SS]chkpt_message.c:3047 Invalid checkpoint client ID (0).[...It occurred 3 times.!]" I can't find anything in the bug search tool but I am going to contact TAC. I have been complaining for a while about all the background syslog messages/noise. The workaround has always been reduce the logging level, but if you reduce the logging level you miss stuff when you try to troubleshoot.
01-20-2018 09:05 PM
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvf22697
01-23-2018 05:05 PM
Good to see you are back in to CSC forum Saravanan, you provide great value to the community.
Keep allocate your time here :)
Rasika
01-23-2018 09:11 PM
09-24-2018 04:13 AM
Seeing this on many controllers as well. 8.5.131.0, 8.2.164.0 releases. Was there ever a resolution, other than filtering ?
06-18-2019 02:51 AM
Same issue 5508 - 8.3
06-18-2019 06:48 AM
06-19-2019 02:10 AM
8.3.143 but its ok I'm going to upgrade to 8.5.140 in 1 month.
08-19-2019 10:58 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide