Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 17 , 2026 through Tuesday August 31, 2026. Our experts Saikat Nandy and Prashanth Bargur Hanumantharayappa will be waiting to assist you and resol...
Tonight I was supposed to swap in our replacement/upgrade WLC. We are upgrading from a 2504 to a 3504, and this week I was able to mirror the configs (minus teh few newer feature differences and the mgmt IP).So I get here, I powered down the old, pow...
I want to delete all the configurations in the Cisco AP 2702i device so that I can load the new firmware to use as before, how do I do it?
Hi, We have several Cisco 7500 flex WLC, 5508 WLC, 3504 WLCs forming EOIP tunnel with the anchor WLCs in our network.. The anchor WLCs are of models 5508 running on version 8.0.152.0 and 3504 WLC with version 8.5.131.0. We are planning for a desig...
Hi , I am newbie by for CISCO WLC , I need to upgrade reason by audit check so I will upgrade the WLC to the the stable version from 5.8.x to 5.10.x all of (APs 300) unit use Flexconnection , The access point models support were check no worry ab...
We are seeing Bulk status as "in progress" for more than a day.controller model : AIR-CT5520-K9Version : 8.3.143.0 checked and found nothing related to Bug. Need your suggestion on how to fix this.
Hi,wlc model 5508ios :8.5.135.0AP Model:3700/3800/2600AP-Mode: Flex connect We have configured the flex group in our infra.Due to link flaps the AP's disassociates from WLC and joins back to the wlc.But it is not joining to the respective flex group....
I am trying to get a better handle on data rate settings. Looking at the guide (https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_010111.html) I can understand the categories as described:disabled —Clie...
We are configuring a number of sites to come back to our data center for guest via auto-anchor. One site still has 3502i access points. If we were to use a 9800 controller as the Anchor would the 3502 (foreign 5520 HA) be compatible until we can repl...
Hello all,someone has find a way (OID) to monitor by SNMP WLAN Client Count for WLC 9800?For AireOS it was simple to get that value, knowing the OID; so for each WLAN it is possible to know how many clients are connected. For WLC9800 I haven't find a...
Hello, I found WMIC 3201 shut down its wireless in -20℃ (environment temperature), and its internal temperature is at -2℃. I need to modify the configuration to let it work in at least -30℃, but I don't know how to do. Please give me some suggest...
Hi, I converted the AP into Lightweight and currently it is not connected to any WLC.Need to know if flashing red lights which are moving from status,ethernet icons are due to the fact that AP is not connected to any WLC? Also need to confirm that l...
I'm trying to enhance a network, and want to add APs to get greater capacity (I know less is more in WiFi, but I cant get the throughput with 25+ active users on an AP). I have 2702is in sutu, they are EOS, so I'd rathe not try to buy any. I don't ha...
A client has purchased an 9105AXI they want to be used on a Site survey. However they did not get the EWC version. I am trying to set this up only to be used for verification. I have done some research and found that it is possible to upgrade the AP ...
Hello, We have a problem here, this has been happening since 1 year ago. Client connections from the access point in our office are always drop randomly.We are using Cisco Catalyst 9800-L-F (IOS-XE 16.12.4a) and Cisco Aironet 1815i.The average device...
I am looking to configure an AD authenticated SSID on a C9800 WLC. In the past I have been able to successfully do this from the 5500 series controllers to a Windows NPS server. However when I try and configure the C9800 with a Windows NPS server I...
