03-06-2014 01:45 AM - edited 07-05-2021 12:21 AM
hi all
I am trying to study Unified access Bootcmap lab in my office. i have made my lab but i'm in the trouble for NAD's
Boot Camp Lab Guide already configured. so i couldn't know how configuring in my lab.
as you can in the figure that i want to know. the whole configuration anybody know about that?
i atteched word file. this is unified access bootcamp 110 page
08-01-2014 09:33 AM
check the following links for NAD(Switch/WLC) configuration to support ISE
http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_10_universal_switch_config.pdf
http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/design-zone-security/howto_11_universal_wlc_config.pdf
08-01-2014 02:53 PM
Hi
If you want simply add a NAD to your ISE you can do that via below
Administration > Network Resources > Network Devices
In this example I have configured 3850 switch as NAD with ISE. Hope that gives you some guidance
http://mrncciew.com/2013/12/06/wlan-config-with-3850-part-2/
HTH
Rasika
**** Pls rate all useful responses ****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide