telnet in ap521

[konsta]

hello.i use autonomous ap521. because cca cant manage more than 3 ap i use web for config.but many function accessed only through console port. i cant 'configure terminal' in telnet session.its marketing restriction and i must use only console\web\cca?

[didyap]

Here is the URL for the Converting an Autonomous Access Point using CCA and how to use through CCA follow the guide

http://www.cisco.com/en/US/docs/wireless/controller/526/1.5/configuration/guide/A2_aap.html#wp1015097

[jeff.kish]

Also, ensure you don't have a lightweight version of the AP, since normally a lack of "config t" means it is not an autonomous AP. Even if you ordered the correct part#, Cisco has been known to mix up the APs and send the wrong ones :D

Jeff