toplogy mesh wireless cisco : RAP and MAP

[Dhikra Marghli]

Hello

I have a question about toplogy mesh wireless cisco : RAP and MAP

i want to know if Toplogie mesh wirless is need is need controller hardware or  moblity express ME 1815i ???

i want link talk about the rules about mesh with AP 1815i moblity express ??

Thanks in advance 

[Sandeep Choudhary · Accepted solution]

Hi,

As per my knowledge...

Mobility Express doesn't support MESH.  Here you can see what is not supported:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn81mr2.html#pgfId-1319021

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

mean that topolgy mesh need a controller haradware !!??  not moblity express !!

 so Toplogy mesh need  controller and access point !!

thanks in advance 

[Sandeep Choudhary · Accepted solution]

Also check the link for new software which say Mesh mode not supported:

Check Table 9

https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn88.html#ap-wave2

Regards

Dont forget to rate helpful posts

[Dhikra Marghli · Accepted solution]

Mean that 1815 is not supported mode mesh 

so what are the hardware AP supported mod mesh !!

thanks in advance

[Sandeep Choudhary · Accepted solution]

yes you need a hardware controller and APs.

Regards

Dont forget to rate helpful posts

[Dhikra Marghli]

Thanks , i would to know  any  mode acces point work to mode mesh !!?,

thanks in adavnce

[Sandeep Choudhary · Accepted solution]

check the list: https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/8-0/design/guide/mesh80/Mesh_Network_Components.html

Cisco Indoor Mesh Access Points
Indoor mesh is available on the following access points:
802.11n
1040

1140

1260

802.11n+CleanAir
1600

2600

3500e

3500i

3600

802.11ac+CleanAir
1700

2700

3700

Outdorre APs:

example: 1500 series..1532, 1552, 1572

Regards

Dont forget to rate helpful posts