triyng to restore an IOS...

[IngGerardo013]

Hello guys,

Im triyng to load an IOS from xmodem because my AP 1240AG
has no IOS, and these are the results:

ap: copy xmodem: flash:c1240-k9w7-mx.123-11.JA
Begin the Xmodem or Xmodem-1K transfer now...
CCCCCCCCCC           BB0BB0xmodem:: I/O error

what can be the problem??
how can I solve this?

i will apreciate so much your feedbacks!

[Leo Laohoo]

Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Don't forget to rate useful posts.  Thanks.

[Elliott Shawd]

You may want to try a different Terminal application. Also, there's a command you can run before starting the transfer to up the baud rate so it will transfer faster.

[globitsolutionit]

Hello,

maybe too late now, but try changing the BAUD to 57600 baud,

Saludos