03-19-2016 09:10 PM - edited 07-05-2021 04:48 AM
Hi,
I have two internet lines and i want to use then for two different SSID's and the Dhcp pool should be local routing the packets to the internet.
can someone elaborate a little on this, how to use the two internet lines/connections for two different SSID's.
Thanks & Regards,
Adnan
Solved! Go to Solution.
03-20-2016 03:02 AM
Hi Adnan,
easiest way is to create a totally seperate and force this subnet to go a specific WAN line.
Check this posts:
https://glennmatthys.wordpress.com/2012/04/24/policy-based-routing-example-route-one-subnet-via-isp-a-and-another-via-isp-b/
Regards
Dont forget to rate helpful potss
03-20-2016 12:38 AM
Do you have firewall ?
I would say that create a diff subnet for guest access and route this to internet via firewall !!
Regards
Dont forget to rate helpful posts
03-20-2016 02:49 AM
Hi Sandeep,
We only have two connections from the ISP and they are connected to the switch.
That's it.
Regards,
Adnan
03-20-2016 03:02 AM
Hi Adnan,
easiest way is to create a totally seperate and force this subnet to go a specific WAN line.
Check this posts:
https://glennmatthys.wordpress.com/2012/04/24/policy-based-routing-example-route-one-subnet-via-isp-a-and-another-via-isp-b/
Regards
Dont forget to rate helpful potss
03-21-2016 05:53 AM
Hi Sandeep,
Yes I have used the same way, and its working fine.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide