tx power

[zameen2014]

Hi,

To  adjust tx power to fixed value from the  auto ,

what are the criteria need to be followed ?

How to calculate the power threshold value ?

What are the impact power threshold set to higher than the default value

Thanks

[mohanak]

Refer the link : https://supportforums.cisco.com/document/50526/how-configure-and-verify-transmitted-power-level-aps

http://www.cisco.com/c/en/us/td/docs/wireless/controller/5-1/configuration/guide/ccg51/c51rrm.html#wp1111890