09-30-2014 07:14 AM - edited 07-05-2021 01:36 AM
Hello,
I am seeing a lot of broadcast traffic coming from my AP541N-A-K9 access points at port 4554/UDP . I have 5 of these in a cluster. I cant seem to find anything in the manual in regards to this port traffic. Any help is apprecieted
09-30-2014 09:53 AM
Hi
I found this reference for this. As per this it is used for "internal use"
https://www.cisco.com/assets/sol/sb/WAP561_Emulators/WAP561_Emulator_v1.0.4.4/device_info.html
HTH
Rasika
**** Pls rate all useful responses ****
09-30-2014 12:58 PM
Thank you for your response. Do you know what "internal use" is used for though? Right now my firewall is blocking the traffic. Unless I know why it is needed, I do not plan on allowing it. I would also like to possibly turn this off at the access point level to reduce my network traffic.
10-29-2015 05:12 AM
I've got this too on the WAP321. Any way to resolve this?
10-29-2015 06:15 AM
I was unable to find a way.
05-27-2022 09:16 AM
It seems to be related to 'Single Point Setup'. If this is disabled, there UDP traffic on port 4554 disappears.
(Btw, there is also traffic for Bonjour if it is enabled.)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide