UNDER SPECIFICATION RANGE FOR BRI 340

[MAX]

My installation compose by 2 BRI340 (50mw) feeding a dish and a yagi directly connected without any extra RF cable. The optical distance between the equipment is 2 KM and there isn't any obstacles in the straight line. The signals I obtain on both radios are very poor and never I can go up over 1Mb of throughput. Moreover, on both sides, using full power (50mw) is worse than using 30mw. All equipment and antennas have been double-checked and all seems to be right. Any suggestion?

[James Strong]

How high from the ground and building are the antennas? You must be clear of the fresnel zone for proper operation.

[MAX]

Yes, I'm aware of the Fresnel Zone. The Yagi is 3 or 4 meters from the ground, the Dish is 2 or 3 meters from the roof of the build high 15 metres. The Fresnel zone should be respected

Max