04-27-2014 09:49 PM - edited 07-05-2021 12:44 AM
Hello,
We are running WLC 5508 with software version 7.1.91.0. We have recently run into bug CSCua29504 which prevents Windows 8 devices from joining the SSID which is configured with WPA/WPA2 with AES. Can someone suggest me a latest stable version to which i can upgrade our system.
Thanking you in advance.
Prince Mathew
Solved! Go to Solution.
04-27-2014 10:10 PM
You could try 7.4.121.X or 7.6.110.X. Read the Release Notes to ensure you know what bugs are there.
Make sure you upgrade the FUS code too.
04-27-2014 10:41 PM
I would go for 7.4.121.0 with FUS upgraded to 1.9.0.0.
Here is the release notes you should read prior to upgrade
1. http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html
2. http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74mr02.html
At least get 45min outage window if you want to perform both upgrades.
HTH
Rasika
**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****
04-27-2014 10:10 PM
You could try 7.4.121.X or 7.6.110.X. Read the Release Notes to ensure you know what bugs are there.
Make sure you upgrade the FUS code too.
04-27-2014 10:41 PM
I would go for 7.4.121.0 with FUS upgraded to 1.9.0.0.
Here is the release notes you should read prior to upgrade
1. http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html
2. http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74mr02.html
At least get 45min outage window if you want to perform both upgrades.
HTH
Rasika
**** Pls rate all useful responses. Each time you rate a response Cisco will donate $1 to Kiva ****
04-28-2014 03:26 AM
Thanks Leo & Rasika.
I shall try your suggestion during next downtime. Is there a specific order which i should be following while upgrading? Software first and then FUS code?
Thanks,
Prince Mathew
04-28-2014 03:30 AM
Either way it will work, I prefer FUS upgrade first & then WLC software.
HTH
Rasika
04-28-2014 03:33 AM
Okay. Thanks for the prompt response.
Prince Mathew
06-01-2014 10:15 PM
Hi Rasika,
What does FUS code refers to? Is it the system boot image? Which command do i need to issue in order to verify it?
Thanks,
Prince
06-01-2014 10:40 PM
FUS stands for Field Upgrade Software.
It's actually another TLA (three-letter acronym) and is synonymous to the word "bootstrap".
The Release Notes and the procedure about how to upgrade FUS code can be found HERE.
06-01-2014 10:48 PM
06-02-2014 01:36 AM
Nope. It's not the same. You will need to upgrade all the FUS before you hit the latest one.
06-02-2014 02:25 AM
How can i find out the current FUS Code version? The field recovery image version is 6.0.182.0
06-02-2014 02:31 AM
FUS and field recovery are two different things. I'd concentrate more on the FUS.
06-02-2014 02:37 AM
Okay. How do i find out current FUS code ? Thanks!!!
06-02-2014 03:14 AM
06-02-2014 10:48 PM
I am sorry, looks like i have mislead you. I wanted to know the current FUS code running on my controller. Is there a way i can get to know that?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide