07-18-2012 07:58 AM - edited 07-03-2021 10:25 PM
Hi,
I need to upgrade the software on a 2500-series. The only upgrade guide I find is http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a00805f381f.shtml
But that one doesn't list the 2500 under Platforms Supported. Is there something special that is needed to be done in 2500 that isn't required in for example 5500?
Regards,
Philip
Solved! Go to Solution.
07-18-2012 08:09 AM
Code update procedure is same for all WLC platforms, you can follow this link.
07-18-2012 08:09 AM
Code update procedure is same for all WLC platforms, you can follow this link.
07-25-2012 12:03 AM
Thank you very much Saravanan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide