08-20-2012 10:52 PM - edited 07-03-2021 10:33 PM
Hi,
I'm having some difficulties configuring my Cisco WLC (5508) - ver 7.0.230.0 .
I'm have multiple client device residing on same vlan associated to the WLC but unable to telnet over port 8090. However, when inter-vlan, client device able to telnet over port 8090.
So in brief :
Say Machine A as application hosted machine and Machine B as client machine;
Machine A | Machine B | Telnet over port 8090 from B to A |
In Vlan 6 | In vlan 6 | Not ok |
in Vlan 6 | In vlan 4 | OK |
inVlan 4 | In vlan 6 | OK |
Any advice where i should be looking on the WLC to allow telnet port 8090 over from Machine A to B within the vlan .
Thanks.
08-21-2012 03:47 AM
Make sure you don't have PTP blocking enabled on the WLAN SSID advanced tab.
Sent from Cisco Technical Support iPhone App
08-21-2012 09:40 AM
nope, the ptp blocking is disabled by default and were not configuration were made. so its disable. user is still not able to telnet from device from vlan 6 to vlan 6 via port 8090. No ACL were applied. anywhere else i should look at?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide