Using AP group clients are going out wrong interface

[dbrennan_1]

On a 5508 with 7.4.110 code I have clients going out the global interface (on the WLAN itself) rather than the interface stated in the AP Group config. The users are then just hanging and not getting a DHCP address.  I verified the AP(s) are in the group through the GUI and CL.  but when I look up details on the client it's not using the correct interface...feels like a bug but I can't find one that matches.

[Rasika Nayanajith]

Yes, it seems a software issue (or bug) as that is not an intended behaviour

7.4.150.0 is the latest on this code train. Go with that code and test. Here is the release notes of that code

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74mr05.html

HTH

Rasika

*** Pls rate all useful responses ***