Hello,
I'm trying to configure Aironet 1000 series and Aironet 1130 series APs to talk to a wireless controller card inside a 2811 ISR. I have a Catalyst 3550 L2/L3 Switch between my APs and the 2811. So far the Aironet 1000 series found the wireless controller successfully. The following is the current configuration for the 3550 DHCP pool:
ip dhcp pool WLAN_CM
network 172.27.2.0 255.255.255.0
option 60 ascii "Airespace.AP1200"
default-router 172.27.2.1
option 43 ascii "172.27.3.12"
I would like to add another option 60 statement to be able to connect the Aironet 1130 AP. Would this configuration work?:
ip dhcp pool WLAN_CM
network 172.27.2.0 255.255.255.0
option 60 ascii "Airespace.AP1200"
option 60 ascii "Cisco AP c1130"
default-router 172.27.2.1
option 43 ascii "172.27.3.12"
I will try shortly in the lab. I am not sure if I need to create another DHCP pool entirely dedicated for the 1130.
Any input will be much appreciated.