Vlan based on SSID

[NAVIN PARWAL]

Folks,

         I have a requriement where the ACS server should send the vlan information based on SSID the user connected with.

Can I do this in ACS 5.0. I know I have to write a policy. But can not find a fild for SSID.

Any advice would be highly appreciated.

Thanks,

Parwal

[Scott Fella]

You can do that on ACS. For the SSID filtering you have to create an end station filter using the DNIS: *SSID

You have to then place that in your policy. You can also specify the vlan assignment.

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/policy_mod.html

Sent from Cisco Technical Support iPhone App

[Scott Fella]

If you want to do dynamic vlan assignment, you configure the vlan assignment in ACS under Policy Elements |

Authorization and Permissions | Network Access | Authorization Profiles

To specify the SSID:

Authorization and Permissions | Network Conditions | End Station Filters