11-11-2003 03:53 AM - edited 07-04-2021 09:08 AM
I have an AP 1200b (12.02)on a Cisco 3524XL Switch connected to an trunked Port (dot1q). I allready configured 3 VLANS (and there is no Problem with the configuration) with 128bit WEP but when I switch with the Wireless-Client from the native VLan (VLAN Nr. 109) to another created VLAN (VLAN Nr. 313) there is no possible Connection. The VLANS allready exist in the wired Area.
Any Idea?
Hartmut
11-17-2003 06:38 AM
Make sure that when you are switching from one VLAN to another that you are changing the SSID and WEP key if applicable to match the new VLAN on the wireless client.
11-18-2003 11:03 PM
When I change the VLAN, the SSID and Wep-Key will also change.
I am not the only one who have these Problem.
I had contactet a CCNP by Siemens/ Germany and he also have this Problem by configure an AP 1200B and could not help me.
Regards
Hartmut
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide