I have my wired network (w/DHCP and vlan scopes). Attached to the wired network is a 1400 series bridge1 connecting to another 1400 bridge2 (via 802.11a). Bridge 2 connects to a 1200 Access point via a straight ethernet connection. I want to use VLANs on the access point. I configured the trunk between the wired network and Bridge1. I configured the VLANs and SSIDs on the AP, but I’m unable to get an ip address when connecting to vlan2/ssid (vlan 1 is the native vlan and works fine). Any suggestions?
