VWLC - KVM Issue Network Interface

[rcavezzale]

Hi all,

We have a strange problem with network on the vWLC. already used KVM to virtualized unix vm without problem, when try to install the vWLC the VM not recognized the vNIC and show me the follow error:

ifconfig: SIOCGIFFLAGS: No such device

network configuration:

    <interface type='bridge'>
      <mac address='52:54:00:ba:77:78'/>
      <source bridge='br0'/>
      <vlan>
        <tag id='4094'/>
      </vlan>
      <virtualport type='openvswitch'>
        <parameters interfaceid='1e0230d5-86e5-4516-9f91-e2efd047ff74'/>
      </virtualport>
      <target dev='vnet0'/>
      <model type='virtio'/>
      <alias name='net0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>

Could you help me? Best Regards

[Philip D'Ath]

KVM is not supported.  Only VMWare is supported.

[rcavezzale]

I don't think that cisco not support KVM because there is a how to to install it.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-1/KVM/b_CUWN8-1-vWLC-Deployment-Guide-using-LinuxKVM/installing_vwlc_and_kvm_with_ubuntu.html

However i solved my problem

Thanks for support.

[marce1000]

  - If you solved , your problem ; courtesy to the community would inspire you to disclose HOW; and or to expand our knowledge (too).

M.

[rcavezzale]

Hi mark,

the resolution was simple.

I change release from 8.0.x.x to 8.3.102.0