cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1083
Views
0
Helpful
3
Replies

vWLC Problem

ctohang99
Level 1
Level 1

I'm facing a problem on vWLC. I configured the vWLC and Aironet 1252, I created 2 SSID with below settings.

1. WPA2 Auth 802.1X

2. Web-Auth

Inside Wireless, I configured this AP Mode as "Local", but all of the clien device such as iPhone, Laptop can't find these SSID.

May I know how can I fix it?

Thanks!

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

Per the release notes for the vWLC, the vWLC will only support flexconnect access point not local mode access points.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

What WLAN ID is used to configure these?

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Scott Fella
Hall of Fame
Hall of Fame

Per the release notes for the vWLC, the vWLC will only support flexconnect access point not local mode access points.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

Hi All,

Thanks for your information!

Fixed by change the Local Mode to Flex Connect Mode.

Review Cisco Networking for a $25 gift card