vWLC upgrade failed

[yazhu3]

I want upgrade vWLC from 7.6.130.0 to 7.6.130.2, but I can not find such image for vWLC. I can only find the upgrade image for WLC 5500(AS_5500_7_6_130_2.aes),but this image can not use on vWLC, when I down it I got error message 'Transfer Failure: the image is not for this model.' Anybody now will can I get the image for vWLC upgrade? (7.6.110/120/130) Thanks.

[Scott Fella]

I don't know of a v7.6.130.2... If that's a TAC version, then you need to open a TAC case to obtain that. v7.6.130.0 is the latest published release. 

Scott

[yazhu3]

Thanks for your replay .Do you know any about these WLC image for vWLC? Where can I get it?

AS_5500_7_6_120_19.aes for 7.6.120 and  AS_5500_7_6_100_25.aes for 7.6.100

[Scott Fella]

Those are either TAC release (ENG) or beta versions.  You can get them from the BU, if they will provide it.

Scott

[Leo Laohoo]

AS_5500 prefix are Engineering fix.  They are NOT open to the public and are handed out on a case-to-case basis by TAC (as what Scott says).  

This file prefix is valid for 2504/5508/WiSM-2.  I am not aware the same file is valid for the next generation of WLC like the vWLC.  

If you want to get the latest Engineering fix, talk to TAC.  WNBU will also hand it over if you request it.

[Scott Fella]

AS-CTVM-xxxxx is for the vWLC...that is what you will need.

Scott

[Leo Laohoo]

Thanks Scott.  🙂

[mohanak]

For the vWLC you have these images available: check the attachment