01-22-2014 03:18 AM - edited 07-05-2021 12:01 AM
Hi,
I`m implementing a virtual wireless LAN controller and I`m getting problem to create WLAN profile. Follow the logs:
*spamReceiveTask: Jan 22 11:42:50.510: #LWAPP-3-WLAN_ERR2: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX
*emWeb: Jan 22 11:42:50.501: #LOG-3-Q_IND: spam_lrad.c:52448 The system is unable to find WLAN 1 to be deleted; AP XX:XX:XX:XX:XX:XX[...It occurred 3 times.!]
Any idea?
Thanks,
Rodrigo
Solved! Go to Solution.
01-22-2014 06:38 AM
sorry please also paste output of this again:
From WLC: sh sysinfo
If you can then console to AP and reboot it then paste the entire bootprocess here.
Regards
01-22-2014 06:41 AM
are the APs not joining or joining only for an moment?
based on vWLC startup message, you may have to rebuild/redo the vWLC from start.
01-22-2014 08:32 AM
Hey guys,
It's working now. I was capturing AP boot to send you when I went check again deployment guide. I forgot to configure APs in Flexlink AP mode.
Thanks very much for your help sandeepchoudhary21!
Regards,
Rodrigo
01-22-2014 08:33 AM
gald that finally vWLC is working
Any query then revert bak here.
Thanks for rating.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide