cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
580
Views
0
Helpful
1
Replies

WAP125 2.4Ghz WiFi disappears, CPU is pegged at 100%

This is a new WAP125 I recently purchased.  I'm having trouble with the 2.4Ghz wireless disappearing.  5G still works.  The wifi analyzer on my phone shows it is gone and devices can't connect.  Rebooting fixes the problem until it happens 2 days later.

 

In the web interface I notice the CPU utilization is stuck at 100%.

 

Firmware version is 1.0.2.0

1 Reply 1

marce1000
Hall of Fame
Hall of Fame

 

 - Use a syslog server with debugging level set on the AP , scrutinize syslog messages received from the AP, during the disappearing time-periods, check for errors etc.

  https://www.cisco.com/c/en/us/support/docs/smb/wireless/cisco-small-business-100-series-wireless-access-points/smb5592-configure-the-remote-log-settings-on-the-wap125-and-wap581.html

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card