Thanks in advanced!
Follows the WCS and WLC versions:
WCS version : 184.108.40.206
WLC version: 220.127.116.11
We have a situation which users have not been able to access the network and we suspect that is due a IP lack on the Vlan. As the APs are organized by AP group/Vlans, it is hard to see how can I better divide users in other Vlan to solve it. Reports by floor area is not accurate in this case. We do believe that Reports by Vlan will point out where we need to change.
Your help will be very appreciated !
Thanks a lot.
Well if clients can't connect or if dhcp is unavailable, you will not see any of that info. You might want to upgrade to 18.104.22.168 which allows for interface groups. This way you can bundle subnets together and apply these bundled subnets to your ap groups. See the link below
Sent from Cisco Technical Support iPhone App
Upgrade the controller is not possible right now but What I am referring to is that on the WCS 7 I have this options under : Client > Client Sessions >Client Sessions Report Detail
-AP by Floor Area
-AP by Outdoor Area
-AP by RAP Mesh Role
and on WCS 6 shown on this video:
We can see three more option:
–Client MAC Address
That´s my question. Why I can´t see that ?
By Vlan whould be a great repots for us !
Are you AP's in local mode?
Help out other by using the rating system and marking answered questions as "Answered"