WCS:- WLC Alarm not getting cleared automatically on WCS

[Sarasaqlain]

ALarm TAB:-

==========

Severity: Message:

Critical ------------------------------Port 2 is down on Controller.

This Alarm is not getting cleared automatically, Where as the alarms generated for AP's are getting cleared, I would like to know is this the default behaviour or we need to look into some thing here. To clear this i need to manually delete the alarm.

Any help would be greatly appriciated.

[gmarogi]

Alarms are automatically cleared after 7 days. Clear the alarms manually if you want to clear the alarms before 7 days. For more information refer http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#qa11.