WCS/WLC auth via TACACS no ACS

[jasonmathew1]

Greetings,

I would like to use our tacacs servers to authenticate our operations staff to use the WCS web gui and also to login to our WLC's(web/cli).  Is there a way to do this without using the ACS servers?  Is there any special configuration that has to be done in the tac_plus.conf file?

Thanks,

Jason

[Scott Fella]

Here are some links that might help:

WLC & TACAS+: http://www.cisco.com/en/US/docs/wireless/controller/4.1/configuration/guide/c41sol.html#wp1208657

WLC/WCS & TACACS+: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a0080851f7c.shtml#topic5

[carlocon]

These links are no longer valid, I am using Ubuntu´s tac_plus.config version but seems that every time I add the 

service = ciscowlc {  set role1 = ALL } to the script on the user I want to use to authenticate with the WLC avoids the tacacs+ daemon to start, always fails, has someone managed to make it work with tac_plus.config or has an updated link of the responses included on this thread ?

Thanks!