WDS, multiple access points

[mikel.beck]

I have one AP1200 configured as a WDS, it's able to authenticate with itself using the local RADIUS server.

I have others that are configured with the correct username & password, they cannot authenticate with the WDS. They all show "WDS not discovered".

According to the docs I can find, the only configuration required for the other APs is to enable "Wireless Services:AP", and define the username & password. Is this correct?

All of the APs are on different switches on the same IP network, if that makes any difference.

[rmushtaq]

See: http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml

and http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00802085c5.html

to make sure the both WDS and Infrastructure APs are configured according to the tech tip