02-12-2016 04:46 AM - edited 07-05-2021 04:36 AM
I have two SSIDs created in my cisco 1040 AP.
GUEST - VLAN 12
WPA2 with pre shared key
VLAN 12 with ciper AES CCMP
OFFICE - VLAN 1
WPA2 with pre shared key
VLAN 1 with ciper AES CCMP
But when I tried to create another SSID (Voice SSID for cisco 7926 IP Phones)with
VLAN 13 with WEP authentication, it is not allowing to create VOICE SSID. Is there are any way to configure SSID with WEP authentication in cisco 1040 Access Point?
Regards,
Rajitha
02-12-2016 04:49 AM
OS - Version 12.4(23c)JA3
AP - cisco AIR-AP1041N-A-K9
02-13-2016 09:28 AM
Wep is so easy to break why would you even consider using it when WPA2 is simplest to use?
02-15-2016 01:07 AM
Hi,
Cisco 7926G phone doesn't support WPA2.
02-15-2016 05:14 AM
Hello
the 7926 does indeed support wpa2 psk. http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf
02-15-2016 12:59 AM
02-15-2016 01:08 AM
Thanks..!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide