I have been using a WGB with multiple devices behind it on a client mesh network on single VLAN with no issue.
Client has changed their requirement and now want multiple clients on multiple VLANS over the WGB.
I have attempted to change the configuration of the WGB for this to allow the VLANS configured on the WLC, however the SSID/Interface the WGB connects to is not the native VLAN of the controller.
Has anyone got multiple VLANS over WGB when SSID is not mapped to mgmt interface or Native VLAN configuration does not match all switches and the WLC?
I have seen the following command listed in some documentation but not others: config wgb vlan enable ( TO be enabled on WLC) DO I need this before I go any further?
I am suggesting to apply the config wgb vlan enablre and create a new WLAN on the mgmt interface of the WLC so the Native VLAN configuration can be matched on all switches for the mesh network.
Can anyone who has experience with this please comment?
Thanks.
