cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
372
Views
0
Helpful
2
Replies

What factors let Radio reset ?

DuJin0509
Level 1
Level 1

Hello everyone,

What factors could let AP's  Radio reset ? My AP generated syslog as below:

*Jun 21 14:51:10.677: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 21 14:51:10.682: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 21 14:51:11.678: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jun 21 14:51:11.709: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 21 14:51:11.715: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jun 21 14:51:11.720: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jun 21 14:51:12.746: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jun 21 14:51:13.745: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

Thank you .

1 Accepted Solution

Accepted Solutions

Refer below document for radio reset codes

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-3700-series/117869-technote-ap-00.html

Addition to this if you modify WLAN settings momentarily radio interfaces go down

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 Replies 2

Refer below document for radio reset codes

http://www.cisco.com/c/en/us/support/docs/wireless/aironet-3700-series/117869-technote-ap-00.html

Addition to this if you modify WLAN settings momentarily radio interfaces go down

HTH

Rasika

*** Pls rate all useful responses ***

Thanks Rasika,

Information you have shared is extraodinary.Thanks for your help.

Review Cisco Networking for a $25 gift card