cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
788
Views
0
Helpful
3
Replies
buxgvscisco
Beginner

Which command in the Cisco AP1200 series will you use to broadcast the SSID using VLANs?

Folks,

Which command in the Cisco AP1200 series will you use to broadcast the SSID using VLANs?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Scott Fella
Hall of Fame Master

guest-mode

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

3 REPLIES 3
Scott Fella
Hall of Fame Master

guest-mode

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***

View solution in original post

If you have enabled mbssid, "guest-mode" would be replaced by "mbssid guest-mode" this would also allow multiple ssid's to be broadcast

-Tim

Sent from Cisco Technical Support iPad App

You would have to use "mbssid" on the radio interface as well to broadcast multiple ssids.

Regards

Sahil

Content for Community-Ad