03-07-2017 02:11 AM - edited 07-05-2021 06:39 AM
hi we have new cisco WLC 5508 and ise 2.2
all thing has been configure but while accessing the wi-fi all user able to access intranranet (LAN) but unable to access internet (WAN)
we are using websnce proxy
so can you someone tell me the solution
Regards
Ashish Tiwari
03-07-2017 02:38 AM
any failure log son ISE ?
How is your setup, which authentication are you using ?
Regards
03-07-2017 04:35 AM
no failure log in ise
authentication SSO
below is our setup
WLC-L3switc-Proxy-FW-WAN
we are not getting proxy seeting on wi-fi devices
03-07-2017 05:48 AM
what port the proxy listening on ? try to configure these on WLC:
(WLC1) >config network web-auth ?
captive-bypass Configures the WLC to support captive-bypass
cmcc-support Configures the WLC to support eWalk (CMCC) format.
https-redirect Configures secure redirection(https) for web-auth clients.
port Configures additional ports for web-auth redirection.
proxy-redirect Configures proxy redirect support for web authentication clients.
secureweb Configures secure web (https) for web-auth clients.
webportal-server Configures webportal server.
(WLC1) >config network web-auth port ?
<port> Configures additional ports for web-auth redirection.
(WLC1) >config network web-auth port <port number>
Regards
Dont forget to rate helpful posts
03-07-2017 06:30 AM
Hi
Plz tell me where I need to do this on GUI mode on CLI mode
If in CLI mode please reply me with all commands
Or if GUI mode please tell me the steps
Also a thanks you for your prompt response
Regards
Ashish Tiwari
03-07-2017 11:01 PM
run these commands on CLI
03-07-2017 10:40 PM
hi
in this case ISE will work or not , i mean to say ISE will authenticate or not
Regards
Ashish Tiwari
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide