cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
510
Views
3
Helpful
6
Replies

Wi-Fi usser unable to access internet

CSCO11756745
Level 1
Level 1

hi we have new cisco WLC 5508 and ise 2.2

all thing has been configure but while accessing the wi-fi all user able to access intranranet (LAN) but unable to access internet (WAN)

we are using websnce proxy 

 so can you someone tell me the solution 

Regards

Ashish Tiwari 

6 Replies 6

Sandeep Choudhary
VIP Alumni
VIP Alumni

any failure log son ISE ?

How is your setup, which authentication are you using ?

Regards

no failure log in ise 

authentication SSO

below is our setup 

WLC-L3switc-Proxy-FW-WAN 

we are not getting proxy seeting on wi-fi devices

what port the proxy listening on ? try to configure these on WLC:

(WLC1) >config  network web-auth ?

captive-bypass Configures the WLC to support captive-bypass
cmcc-support   Configures the WLC to support eWalk (CMCC) format.
https-redirect Configures secure redirection(https) for web-auth clients.
port           Configures additional ports for web-auth redirection.
proxy-redirect Configures proxy redirect support for web authentication clients.
secureweb      Configures secure web (https) for web-auth clients.
webportal-server Configures webportal server.

(WLC1) >config  network web-auth port ?
<port>         Configures additional ports for web-auth redirection.

(WLC1) >config  network web-auth port <port number>

Regards

Dont forget to rate helpful posts

Hi

Plz tell me where I need to do this on GUI mode on CLI mode 

If in CLI mode please reply me with all commands

Or if GUI mode please tell me the steps

Also a thanks you for your prompt response

Regards

Ashish Tiwari

run these commands on CLI

hi 

in this case ISE will work or not , i mean to say ISE will authenticate or not 

Regards 

Ashish Tiwari

Review Cisco Networking for a $25 gift card