10-11-2014 10:35 AM - edited 07-05-2021 01:42 AM
Hi Guys,
I've just set up a wired guest access for my HQ but I'm wondering if it is possible to do the same in a branch office because We do not have another controller in this site, could this be accomplished using the wlc of the hq?
Any ideas please.
Regards
Oscar
Solved! Go to Solution.
10-11-2014 02:48 PM
If you have L2 communication between HQ & BR, this is possible (then you can extend your wired user vlan to your WLC).
Otherwise you have to have a WLC at your branch as well.
http://mrncciew.com/2013/03/26/wired-guest-access/
HTH
Rasika
**** Pls rate all useful responses ****
10-11-2014 02:48 PM
If you have L2 communication between HQ & BR, this is possible (then you can extend your wired user vlan to your WLC).
Otherwise you have to have a WLC at your branch as well.
http://mrncciew.com/2013/03/26/wired-guest-access/
HTH
Rasika
**** Pls rate all useful responses ****
10-11-2014 03:33 PM
Thanks for your reply Rasika,
i have a router 3945 with a sre-700 installed (Branch) is it possible to run a vWLC on it to get this working?
Thanks so much for your help
Oscar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide