cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
391
Views
0
Helpful
2
Replies

Wireless client static ip address

ibrkic001
Beginner
Beginner

Hello,

is there a enabled "HREAP Local Switching: and enabled option "Learn Client ip address" on WLC can be a problem for static ip addresses on client?

we have problem with wireless connection for Android devices

Point is that we must have static IP addresses on Android devices in order to monitor that devices.

On one area when we have WLC with software version 8.5.135.0 everything works fine, but when we try all this
on area where is WLC with software version 7.0.252.0 , and enabled HREAP , after one period android loses wi-fi connection, and can not obtain again connection for that static IP. We must again switch on DHCP , and then works fine.

 

best regards

2 Replies 2

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

Quiet possible it is due to feature differences between these two code releases

https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/201007-AireOS-feature-list-per-release.html# 

 

What is the issue you facing when the client set to DHCP?

 

HTH

Rasika

When we set  client to DHCP, then works fine, with occasional signal loss, and after that client returns on the network, but with settings with static IP address client can not return on network, we must back settings to DHCP.

 

Regards 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers