Wireless clients cannot access WMI of C9800

[jaiwaei36]

Hi, I was wondering how to enable wireless client to access the WMI of C9800 as one of the SSID is belongs to IT infra where the IT staff would like to access the WMI of C9800 via GUI and SSH

Many Thanks,

Darren

[marce1000 · Accepted solution]

 - FYI : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html#DisableManagementviaWireless  , but do the reverse !  Whilst you are at it have a checkup of the C9800 configuration (always very useful and advisable) -> Use the CLI command : show  tech   wireless , have the output analyzed by  https://cway.cisco.com/tools/WirelessAnalyzer/  , please note do not use classical show tech-support (short version) , use the command denoted in green for Wireless Analyzer.               Checkout all advisories!

 M.

[jaiwaei36]

Thanks alot @marce1000 

[marce1000]

 - No  problem , take note of : https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvu29200  , which probably won't affect you now , but useful to know.

 M.