Wireless Regulatory Domains

[Ricky Sandhu]

Good morning, we purchased 10 Cisco 2702i APs. Two of these APs came bundled with a WLC.  These 2 APs are of universal domain as opposed to the regular domain for the other 8.

What is the difference between universal and regular domains?  I am based in Canada.

[Rasika Nayanajith · Accepted solution]

These UX domain AP has to prime in order to use. Refer below

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/AP_Regulatory_Domain_DG/b_universal_AP_regulatory_domain_DG.html

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

Here is another blogpost on this

http://sc-wifi.com/2015/10/26/ux-domain-aps/

HTH

Rasika

*** Pls rate all useful responses ***

[Ricky Sandhu]

Thanks Rasika. 

[mohanak]

The aim of introducing Universal SKU AP is to address the worldwide regulatory compliance requirement based on geo-location of the Cisco Wireless Access Points (APs). Solution will collapse all current regulatory domains into a single SKU APs. This will be applicable only to newer -UX PIDs introduced and will not affect the existing APs that are preconfigured with a specific regulatory configuration.